|
Features |
![](https://www.maxxmodel.com/image/catalog/product_right_arrow.png) |
Machined from a solid aircraft aluminum block with tight tolerances to provide better accuracy, consistency, and durability |
![](https://www.maxxmodel.com/image/catalog/product_right_arrow.png) |
Improved accuracy and ensure consistent air seal for Tokyo Marui (include KRYTAC, except KWA) M4/M16 Standard AEG series |
![](https://www.maxxmodel.com/image/catalog/product_right_arrow.png) |
Precision rotary dial design for fine hopup adjustments |
![](https://www.maxxmodel.com/image/catalog/product_right_arrow.png) |
Re-engineered the hopup levers and concave nubs to work best with R-hop, Flat-Hop and Standard-Hop to keep the BBs shooting straight and accurate on every single shot |
![](https://www.maxxmodel.com/image/catalog/product_right_arrow.png) |
Removable Brass Threaded Slot Pin for setup and maintenance |
![](https://www.maxxmodel.com/image/catalog/product_right_arrow.png) |
Accepted the nozzle length from 21.00mm to 21.25mm |
![](https://www.maxxmodel.com/image/catalog/product_right_arrow.png) |
Fully compatible with most aftermarket soft and hard rubber bucking without losing FPS or dropping BBs |
![](https://www.maxxmodel.com/image/catalog/product_right_arrow.png) |
Equipped with a new CNC Delrin Locking C-Clip design to hold barrel tight without wobbling and twisting |
![](https://www.maxxmodel.com/image/catalog/product_right_arrow.png) |
Equipped with 3 compression springs on top, at bottom and in center of housing to ensure the hopup unit is exactly centered, straight and air tight |
![](https://www.maxxmodel.com/image/catalog/product_right_arrow.png) |
Compatible with any V2 gear boxes with 11mm or 11.5mm bore |
![](https://www.maxxmodel.com/image/catalog/product_right_arrow.png) |
Specially designed with BB Latching System to prevent dropping BBs after removing the magazine |
![](https://www.maxxmodel.com/image/catalog/product_right_arrow.png) |
Manually opened to release BBs from inside hopup chamber by hand |
![](https://www.maxxmodel.com/image/catalog/product_right_arrow.png) |
The UV LED Tracer and Electronic Module to glow BBs in the dark ready! |
![](https://www.maxxmodel.com/image/catalog/product_right_arrow.png) |
The Empty Magazine Detection Sensor to stop Motor/HPA firing ready! |